How to Connect BRAUN DigiFrame 1019 WiFi to Your Home Network
By BRAUN Photo Technik Germany – Seit 1915 | Published: 2026-10-30
Category: How-to Guides
Follow these simple steps to connect your BRAUN DigiFrame 1019 WiFi to your home network and start sharing photos wirelessly via the free app.
Quick Answer
To connect your BRAUN DigiFrame 1019 WiFi to your home network, first power on the frame, then use the touchscreen to navigate to the WiFi settings and select your network. Enter your Wi-Fi password using the on-screen keyboard, and the frame will connect automatically.
What You Need Before Starting
Make sure you have a 2.4 GHz Wi-Fi network available—the BRAUN DigiFrame 1019 WiFi supports 802.11 b/g/n standards, which typically operate on the 2.4 GHz band. If your router uses a combined 2.4/5 GHz network, the frame should still connect, but you may need to separate the bands in your router settings if you experience connection drops.
Also have your Wi-Fi network name (SSID) and password handy. The frame does not support WPA3 encryption, so if your router uses WPA3 only, switch to WPA2/WPA3 mixed mode or WPA2 for compatibility.
Step-by-Step Connection Guide
- Power On and Access Settings: Plug in the frame and press the power button on the back. Once the home screen appears, tap the gear icon to open Settings, then select 'WiFi' or 'Network'. If the screen is unresponsive, check that you removed the protective film from the touchscreen.
- Select Your Network: The frame will scan for available networks. Tap your home Wi-Fi network name from the list. If you don't see it, move the frame closer to the router and tap 'Refresh'. Common mistake: The frame only shows 2.4 GHz networks; if your router broadcasts a 5 GHz-only network, the frame won't detect it.
- Enter the Wi-Fi Password: Use the on-screen keyboard to type your Wi-Fi password carefully. The keyboard includes uppercase, lowercase, numbers, and symbols. Tap 'Connect' after entering the password. Double-check for typos—passwords are case-sensitive. If connection fails, re-enter the password and ensure your router is set to WPA2 or mixed mode.
- Verify the Connection: Once connected, the frame will display a confirmation message and the Wi-Fi icon will appear in the status bar. You can now use the free smartphone app to send photos wirelessly. If the icon shows a weak signal, consider using a Wi-Fi extender or repositioning the frame for better reception.
Product Details
- BRAUN DigiFrame 1019 WiFi weiss: The BRAUN DigiFrame 1019 WiFi features a 10.1-inch IPS touchscreen with 1280x800 resolution and built-in 16 GB storage for up to 10,000 images. The touchscreen makes network setup intuitive without needing a separate remote, and the generous storage means you can load many photos before transferring them wirelessly.
BRAUN DigiFrame 1019 WiFi weiss
