How to Use BRAUN VloggKit 140 Ring Light for Better Videos

Quick Answer

Set up the BRAUN VloggKit 140 ring light by assembling the metal tripod, mounting your smartphone, and adjusting the 336 LED lights with three color temperatures and dimming control for flattering, even lighting.

Step-by-Step Setup & Usage

1. Assemble the Tripod and Ring Light: Extend the metal tripod legs fully and tighten the locks. Screw the ring light onto the tripod head. Plug in the included power adapter. Common mistake: Forgetting to lock the tripod head, causing the light to tilt forward. Check that all locks are tight before attaching your phone.
2. Mount Your Smartphone: Attach the included phone holder to the ring light's center mount. Slide your phone in securely, ensuring the camera lens is centered. Common mistake: Placing the phone off-center, which shifts the light angle and creates uneven shadows. Center the phone so the ring light is directly behind it.
3. Adjust Height and Angle: Position the ring light at eye level or slightly above, about 18–24 inches from your face. Tilt the light downward slightly for a more flattering angle. Common mistake: Placing the light too low, which casts unflattering upward shadows. Eye-level or slightly above is your goal.
4. Set Color Temperature and Brightness: Press the button on the ring light to cycle through three color temperatures: warm (tungsten), neutral (daylight), and cool (fluorescent). Use the dimmer to adjust brightness. Common mistake: Using warm light in a room with cool ambient light, creating a color mismatch. Match the color temperature to your room's dominant light source.
5. Test and Record: Open your camera app, frame your shot, and check for glare or hot spots. Record a short test clip. Common mistake: Not checking for lens flare from the ring light reflecting off glasses or shiny surfaces. Adjust the light angle or your position if you see reflections.

Product Spotlight

• BRAUN VloggKit 140: The BRAUN VloggKit 140 features a 14-inch (35.56 cm) ring light with 336 LEDs and 35W power, dimmable with three color temperatures. This gives you flexible control over warmth and brightness, so you can match ambient lighting and avoid washed-out or yellowish skin tones.