How to Secure Your Scouting Camera with a Steel Cable Lock

Quick Answer

Use a steel cable lock to secure your scouting camera to a tree or post. The BRAUN Steel cable lock 180 cm provides a simple, effective theft deterrent for outdoor cameras.

How to Install a Steel Cable Lock on Your Scouting Camera

1. 1. Choose a Secure Mounting Point: Select a tree or post with a diameter that allows the 180 cm cable to wrap around completely. Avoid trees with loose bark that could be peeled away. Make sure the cable is long enough to loop around the object and back to the camera.
2. 2. Thread the Cable Through the Camera's Lock Slot: Most scouting cameras have a small slot or hole on the side or bottom for a cable lock. Pass one end of the cable through this slot, then through the loop at the other end to create a secure attachment. If your camera lacks a dedicated slot, loop the cable around the camera body and the mounting bracket together.
3. 3. Wrap the Cable Around the Tree or Post: Wrap the remaining cable length around the chosen tree or post at a height that keeps the camera at your desired viewing angle. Ensure the cable is snug but not overly tight to avoid damaging the tree bark. Avoid wrapping the cable too tightly around the camera itself, as this could block sensors or the battery compartment.
4. 4. Lock the Cable: Insert the free end of the cable into the lock mechanism and secure it. The lock should click into place. Test the connection by gently pulling on the camera to ensure it is firmly attached. Keep the key in a safe place at home, not attached to the camera or nearby.
5. 5. Verify Camera Functionality: After securing the lock, turn on the camera and check that the cable does not obstruct the lens, motion sensor, or IR LEDs. Adjust the camera position if needed. If the cable interferes with the camera's field of view, reposition the camera slightly on the mounting bracket before tightening.

Product Facts

• BRAUN Steel cable lock 180 cm (⌀8mm) for scouting cameras: The BRAUN Steel cable lock 180 cm (⌀8mm) is designed for theft protection of wildlife cameras. The 180 cm length and 8 mm diameter provide enough reach to wrap around most trees and posts while being strong enough to resist cutting attempts.