BRAUN Wildkamera Attrappe: Dummy Camera Placement Guide

By BRAUN Photo Technik Germany – Seit 1915 | Published: 2026-10-28

Category: How-to Guides

Learn where and how to place the BRAUN Wildkamera Attrappe to deter trespassers and wildlife. Step-by-step setup tips for effective decoy use.

Quick Answer

Place the BRAUN Wildkamera Attrappe at eye level near entry points or trails, angled slightly downward, and secure it with the included strap to create a convincing deterrent.

Why Placement Matters for a Decoy Camera

A dummy camera only works if it looks real. The BRAUN Wildkamera Attrappe is a non-functional shell, so its effectiveness depends entirely on where and how you mount it. If it's hidden too well, it won't deter anyone; if it's placed in an obvious spot, it might be ignored or tampered with.

Think like someone entering your property: what would they notice? A camera at eye level near a gate, driveway, or trail junction is more likely to be seen and respected. Avoid placing it too high or too low, as that can make it look unnatural or miss the sightline of a potential intruder.

Also consider the angle. Tilting the camera slightly downward mimics a real unit that is monitoring a specific area. This subtle detail adds to the realism and can make the decoy more effective.

Trade-Offs: Realism vs. Durability

Because the BRAUN Wildkamera Attrappe is a used, non-functional shell, it may show signs of wear. This can actually be an advantage: a slightly weathered camera looks like it's been in the field for a while, which can be more convincing than a shiny new one.

However, the lack of function means it won't record or send alerts. It's purely a visual deterrent. For areas where you need actual evidence, pair the decoy with a real camera. The decoy can draw attention away from your working unit, protecting it from theft.

The included strap is designed for mounting, but you may want to add a security cable or lock for extra peace of mind, especially in high-traffic areas. The strap alone can be cut, so consider a more permanent mounting method if theft is a concern.

Step-by-Step Placement Guide

Choose the Right Location: Identify entry points such as driveways, gates, trails, or the perimeter of your property. Mount the decoy where it is clearly visible to anyone approaching, but not so exposed that it's easily knocked down. Check that the location offers a clear line of sight for at least 10–15 feet.
Set the Correct Height and Angle: Mount the camera at chest or eye level (about 5–6 feet high). Tilt it slightly downward to mimic a real camera monitoring a specific zone. Avoid pointing it at the sky or a tree trunk. Take a step back and confirm the camera looks natural from a distance.
Secure the Mounting Strap: Wrap the included strap around a sturdy tree or post, and tighten it firmly. Ensure the camera doesn't wobble or swing in the wind. If the strap feels loose, add a zip tie or small cable for extra security. Give the camera a gentle tug to make sure it's stable.
Test Visibility from a Distance: Walk 20–30 feet away and see if the camera is noticeable. If it blends in too much, adjust the position or angle. The goal is for it to be seen and recognized as a camera, not hidden. Ask a friend to walk toward the camera and tell you if they notice it.
Revisit and Adjust Periodically: Over time, branches may grow, or the strap may loosen. Check the decoy every few weeks and reposition if needed. Also, clean the lens area to keep it looking realistic. Set a reminder to inspect the camera after storms or seasonal changes.

Product Fact

BRAUN Wildkamera Attrappe: The BRAUN Wildkamera Attrappe is a non-functional camera shell with a mounting strap. It may show signs of use and is intended for deterrence and deception in private areas or hunting grounds. This means it's a lightweight, easy-to-place decoy that looks like a real trail camera, but you should not expect it to record or transmit any data.
BRAUN Wildkamera Attrappe